Net weight: 35KG Total weight: 75kg (2 pieces)

Product size (MM) : 700W×460D×310H

Packing size (MM) : 780W×980D×700H(two air boxes)

The speaker is a passive trident design with 2 built-in 10 "low frequency units, 1 built-in 10" IF unit with horn phase plug, and 2 built-in 1.4 "high frequency compression units (2" voice coils) mounted on a ring waveguide unit. Because the low-frequency elements of the neodymium magnetic steel, the IF and high-frequency elements of the coaxial structure form a symmetric dipole arrangement, the adjacent frequency bands are smoothed and superimposed by cross-coupling design. This allows the excellent 80° level constant pointing diffusion Angle to control the lower frequency to 250 Hz. The mechanical component construction and acoustic design enable vertical line arrays that can form up to 24 speakers to be suspended. Can form an independent line array system already, also can match many SUB speaker to form a system. Polyrimu polyrimu Cabinet is made of polyrimu polyrimu polyrimu and polyrimu polyrimu polyrimu polyrimu Cabinet. The front panel of the speaker is protected by a rigid metal mesh cover, which is followed by a sound permeable plastic foam. Side panels are fitted with handles and two additional recessed handles are provided at the rear bottom of the case.

Features & Advantages:

1 and 2 2-inch neodymium magnetic tweeters are operated in parallel, and a plane wave converter combined with an optional 80° exponential curve identically directional horn is used to produce a consistent wave front.

2. The mid-frequency part is composed of a 10-inch neodymium magnetic unit with high sensitivity and fully closed structure, which is installed behind the treble unit to form a coaxial structure. The mid-frequency horn phase plug is installed on the mid-tone surface to improve the directivity and increase the sensitivity of the high end of the mid-tone.

3. Two 10-inch neodymium magnetic subwoofer units can greatly reduce the sound interference between the whole speaker box through the foam material phase board, which is simulated by the software, and ensure the sound of vertical and consistent sound. Under the parallel working condition, the two cone-disc loudspeakers will exert force at the same time, so as to ensure the solid medium and low frequency and strong impact force.

4, a successful modern loudspeaker system, just have an impressive sound is not enough, it should also have a simple, safe handling device as well as rapid construction and disassembly system. This is not a problem for the Q510. Thanks to our newly developed 3-point integrated lifting system, its innovative log-angle adjustment mechanism ensures accurate bending and projection angles for linear arrays, even for large backfields. Therefore, we only need to select an appropriate number of ultra-low ground components to form a sound amplification system with broad directivity, long projection distance, high sound pressure and good hearing sense.

5. It is widely used in large squares, gymnasiums, large performing arts venues, concerts, large multi-function halls, etc.

Specifications & Parameters:

The basic features

Speaker Type tri-frequency line array speaker

Driver HF: 2 "×2 Ndfeb compression waterproof drive unit

MF: 8 "×1 Ndfeb IF drive unit

LF: 10 "x 2 Ndfeb low frequency drive unit

Divider point external tri divider LF: 80 HZ-300 HZ

MF: 300 HZ-1.5 KHZ

HF: 1.5 KHZ - 20 KHZ

Connect the input 1 x NL8 core waterproof plug

Output 1 x NL8 core waterproof plug

Connection mode: 1-2+... HF, 3-4 +... MF, 5-6 +... LF

Type of box wedge-shaped box

Material import high quality layer plywood

Surface treatment box black polyurethane spray

Surface mesh black porous powder - sprayed steel mesh and sound - permeable speaker mesh

Speaker power Rated power RMS LF:600W MF: 200W HF: 160W

Continuous power LF:1200W MF: 400W HF: 320W

Maximum power LF:2400W MF: 800W HF: 640W

Directivity level: 80°×(0-14)°

Variable, depending on the array length and configuration

Sensitivity (1W/1M) LF: 98dB SPL MF: 99dB SPL HF: 108dB SPL

Maximum noise pressure level: LF: 127dB SPL MF: 128dB SPL HF: 138dB SPL

Rated impedance (single) LF: 8 ω MF: 16 ω HF: 8 ω

Install the transportation

Special hanger for installation of hanging parts with 1/2 inch shackles

The lifting point is set up with special three-point hanging

Adjustable Angle 0-14° (unit adjustment Angle is 1°)

Carry 2×ABS handles

Standard fittings 5× φ10 stainless steel high strength bolt

Optional accessories Aviation box, hanger, caster bracket, 4 "polyurethane casters

Electroacoustic index

Frequency response LF: 60 HZ-2.5 KHz

MF:160Hz-5KHz

HF: 900HZ-18khz (± 3dB)

LF: 55 hz - 3 KHZ

MF:160Hz-6KHz

HF: 900HZ-20khz (-10dB)